Peugeot 308 Key Fob Replacement
Peugeot's 308 could be catching on a little, but it still feels eye-catching. It might not be the most luxurious car in its class It's a Ford Focus or Volkswagen Golf will protect you from sloping surfaces - but it's a relaxed and pleasant driving experience.
We often receive requests from Coded Car Keys to replace peugeot key fobs. If the issue is ongoing or continuous, the following tips should assist.
Water Damage
If you happen to leave your fob in a puddle or splash it with water when kayaking, swimming, canoeing, rafting or canyoning, it's likely to sustain water damage. The best method to prevent this from happening is to always keep it in a dry bag whenever you're outdoors or performing things where the fob might be exposed to excessive amounts of water.
It's also crucial to make sure that the fob is completely dried out prior to opening it up and then use it again. If you smell any odors emanating from the fob (such as industrial liquid or windshield washer fluid) It's another indication that it's submerged.
A circuit board that's damp can cause the battery to lose its charge or even explode. If you are able to get the 308 keyfob from the water you need to turn the button side up and shake as much water out as possible before opening the casing. Once you have opened it, take out the battery and wipe the circuit board using a cotton swab dipped in 90 percent isopropyl alcohol.
Other causes why your Peugeot 308 remote entry keyless system may not function include a dead coin-cell battery or receiver module malfunction, signal interference or a faulty chip. If none of these are the cause, you can try resetting the system by disconnecting the 12 volt battery for around 15 minutes.
Dead Coin Battery
Peugeot cars are equipped with a remote-start feature that allows the driver to start the car from a distance, warming up or cooling down the car prior to entering. This feature is extremely useful, especially during winter's cold and chilly months. However, it is possible that the remote stop system stops operating due to a range of causes, such as the battery in the coin is dead.
The coin-shaped battery contained inside the key fob can last between two and four months, depending on how often it's utilized, the place it was purchased, and how it is used. The date of use is usually printed on the packaging or written in the manual.
If the key fob is not functioning after exposure to water that is clean, you should remove the battery, then clean the chip using a paper towel and isopropyl ethanol, then dry it thoroughly before replacing it. If the key fob was exposed to soapy or salty water, it could have fried the chip. It is necessary to replace it.
If you are not sure the battery is faulty, you can test its voltage using a multimeter set to your car's voltage range. Connect it to the plus and minus terminals. If the voltage is less than 12-13 volts, you must replace the battery. If you want to, you can attempt to reset the onboard computer by disconnecting the battery at 12 volts for a few minutes and then reconnecting it in reverse order (positive cable first followed by negative). The engine should start.
Faulty Receiver Module
If you aren't seeing the "Key Detected" message, it could mean that your receiver module is malfunctioning. It's the component that sends a signal to the car when the key fob is activated which acts as an immobiliser and prevents it from starting until the correct key is present.
This can be due to many causes, such as water damage or simply the aging process. If the electronic chip in your Peugeot 308 keyfob has been damaged by dirty tap water it could be due to the fact that the keyfob was exposed to it. In this scenario you'll have to take off the battery and clean it thoroughly using isopropyl alcohol or electronic cleaner. Once it's dry, you can put the battery back in and test it again.
If the issue isn't resolved you're probably in need of a option to consult an area Peugeot specialist or locksmith. peugeot 208 key replacement G28 Car Keys can utilize a diagnostic tool in order to pinpoint the issue and fix it.
It is stressful to lose your Peugeot car key. A certified auto locksmith will be able to solve the issue in a matter of minutes. They can cut a brand new key and then program it into your vehicle, ensuring you can get back on the road again in the shortest amount of time. Click here to find a local locksmith near you.
A malfunctioning electronic chip
The electronic chip in your Peugeot 308 key fob is an vital component of the remote control system. If it gets damaged, your car may not start or you may get a message saying "anti-theft active". In this situation, the only solution is to replace the key. Auto locksmiths with experience are able to offer the service in the shortest time.
The chip in your Peugeot 308's key fob may fail due to various reasons, such as sweat, water damage, or dirt. If your Peugeot 308 key fob is exposed to soapy water, you should clean it immediately. You can make use of a towel and isopropyl ethanol to clean the electronic component. After that, you should let the battery completely dry.
Sometimes, a key fob can stop working because of radio interference. This can be caused by other devices that operate at the same frequency as your Peugeot key fob. It can also be caused by bad weather or objects in the vicinity. It is recommended that you visit a Peugeot dealer if you encounter this issue.
The Peugeot key fob 207/308 is extremely delicate and requires care. It is imperative not to throw or drop the key fob. If you lose it, try to locate it as quickly as you can. You can reset all on-board computers by disconnecting the 12 volt battery for a short period of time. Remove the negative cable before the positive.